- Description
-
Details
- Weight 250gr
- Diameter 2.8 mm
- Tolerance +/- 0.05mm (Due to the elastic properties of the material, is not a problem during when printing)
- Non-hazardous substance according to the GHS classification
- High adhesion with 3d printed bed
- Do not need heatbed
If your hotend is not optimized with a PTFE liner inside. Please follow these recommendations.
- Print speed 20mm/s
- Print temperature (240 °C)
- None retractions or low distance (1mm retraction distance and 30mm/s speed)
- Increase the extruder flow if your plastic melt flow is not constant.(105-115%)
- Decrease the pressure of the idler bearing of your extruder in order to avoid filament clogging between the extruder gear and bearing.
- Additional Information
-
Additional Information
Pantone No Μήκος No Μάζα 250g Όγκος No Καρούλι Yes Θερμοκρασία ακροφυσίου 225-260°C Θερμοκρασία επιφάνειας No Ταχύτητα εκτύπωσης 20 - 110 mm/s - Reviews
-
- attachments
-
Product Attachments
Filaflex Technical Datasheet
Filaflex Profile Cura 3mm Low Speed
